BRUSH PLATING

Call 631-236-9691 or 410-633-2028

THE TRUTH ABOUT BRUSH PLATING: All brush plating process evolved from their tank plating counterpart.  But instead of taking a part to a plating tank, the plating solution is taken to the part.  But brush plating is only practical in only CERTAIN areas of plating.  Here are a few examples.  If you need to plate an small area of a larger part that cannot be dismantled or would be impractical to dismantle.  If you are doing car emblems or trim pieces while they are on the car.  If you are plating only accents on a part and not the entire part, such as gold plating accents on silverware and silver tea sets.  If you are doing parts smaller than your fist.  The aforementioned situations are some of the few scenarios where you would want to brush plate a part.  Brush plating is very time consuming as compared to tank plating, especially when you are putting multiple coatings onto a part such as triple chrome plating a part.  Why do you think all plating shops use plating tanks?  Choose a tank plating system if you are going to do many different sized parts, if you are going to be doing parts larger than your fist often, or if you are going to be doing a lot of triple chrome plating.  Choose brush plating if your needs fall into the scenarios above.  Pick the right tool for the job and it will make your life much easier.

We offer three different tiers of full brush plating system.  These systems can be customized to almost any applicable brush plating need.  We also sell plating chemicals that can be used with any brush plating system on the market.  Check our prices and compare.  We believe we can save you 25% - 33% on your electroplating brush solutions.

MEDIUM DUTY BRUSH PLATING KIT

Pace 5A plating kit for medium to small jobs. The standard kit Comes with a 5A Pace rectifier, medium wand, ground lead, gloves, goggles, polypropylene cloth anode bandage, 2 liter of Chrome Strip and Metal Activator Brush.  4 oz of Heavy Gold, and more.  This kit starts at $749.00.  Need to do triple chrome plating, tin plating, high speed nickel plating, or silver plating?  We can customize this kit to your needs. 

HEAVY DUTY BRUSH PLATING KIT

Heavy Duty Brush Plating Kit - This kit is also meant for doing large parts and large plating areas.  The kit comes with 25A heavy duty rectifier, large wand, large ground leads, gloves, goggles, polypropylene cloth anode bandage, 2 liter each of Chrome Strip and Metal Activator Brush.  It also comes with 2 liter of any non-precious metal brush solutions such as high speed nickel, bright nickel, tin, cadmium, copper, brass, Alk Copper, or zinc.  This kit starts at $899.00.  Need to plate two or more of these plating metals?  Need to plate gold or silver?  We can customize this kit to any of your needs. 

DELUXE HEAVY DUTY BRUSH PLATING KIT

Deluxe Heavy Duty Brush Plating Kit - This kit is also meant for doing large parts and large plating areas.  The kit comes with 25A heavy duty rectifier, large wand, fine detail wand, carbon wand, 3 ground leads, gloves, goggles, polypropylene cloth anode bandage, Bright Nickel BP, Chrome Strip, Metal Activator Brush, Gold, Silver, TC Chrome, and copper brush solutions.  This kit starts at $1,299.00 (as shown $1,499.00).  Need to plate brass, tin, or cadmium?  We can customize this kit to your needs. 

BRUSH PLATING SOLUTIONS

GOLD:  Comes in non-cyanide base

4oz - $260        0.25L-1L Call for current pricing

 solution ...contains 0.27 pwt per liquid oz - denser gold formula upon request

SILVER: Comes in cyanide or chloride based  (cyanide base can only be sold to a registered business)

8 oz: $210          0.5L-2L Call for current pricing

HIGH SPEED NICKEL:  Used for building up worn parts with a very hard surface

1 liter: $170     2 liter: $319     4 liter: $499

BRIGHT NICKEL: For a bright decorative nickel plating

1 liter: $159     2 liter: $299     4 liter: $469

STAINLESS NICKEL: For nickel plating of stainless steel

1 liter: $149     2 liter: $279     4 liter: $459

ALK COPPER:  Alkaline - plates directly onto steel, iron, brass, bronze, and aluminum.  This solution is a MUST have for pot metal plating

1 liter: $120     2 liter: $219     4 liter: $359

BRIGHT COPPER:  Acid based - plates a high speed semi-bright to bright finish

1 liter: $120     2 liter: $219     4 liter: $359

BLACK CHROME:  (non-toxic)

1 liter: $205     2 liter: $360     4 liter: $539

TC CHROME:  Trivalent Chrome (non-toxic)

1 liter: $189     2 liter: $349     4 liter: $529

BRONZE: Used for bronzing nickel plated parts

1 liter: $120     2 liter: $219     4 liter: $359

TIN:  Used for circuit board and electronic applications

1 liter: $149     2 liter: $279     4 liter: $459

CADMIUM: Alkaline - Semi bright REAL cad plating (not a fake or copy cadmium)

1 liter: $189     2 liter: $349     4 liter: $529

Coloring solution (4 liter) for Cad    Gold = $145, Light Blue= $125

ZINC: Chloride base zinc for a semi bright zinc finish that can be colored black, light blue, gold, and light yellow

1 liter: $120     2 liter: $219     4 liter: $359

Coloring solution are sold separately in 4 liter bottles - Black Zinc = $209, Gold Zinc = $145, Blue Zinc = $125, Light Yellow = $99

BRASS:  Chloride solution for plating brass on various metals

1 liter: $120     2 liter: $219     4 liter: $359

ALUMINUM ZINC PLATE:  Only plating solution that can be plated directly on aluminum.  Use as pre-plate prior to nickel, alkaline copper, brass, etc.

1 liter: $100     2 liter: $190     4 liter: $319

CHROME STRIPPER - 2 liters: $80    4 liters: $110

METAL ACTIVATOR - 2 liters: $90    4 liters: $120

PLEASE VIEW OUR RETURN AND PRICING POLICY BEFORE PURCHASING

HAVE A TRADE IN BRUSH PLATING SYSTEM FOR A TANK PLATING SYSTEM?   OR ARE YOU LOOKING TO SELL YOU BRUSH PLATER OUTRIGHT?   PLEASE CALL US AT 631-236-9691 or email us

BRUSH PLATING RECTIFIERS:  available in 5 amps or 25 amps.....all power supplies are fully adjustable in Volts and Amps.  It puts all the control back into your hands.  Call for pricing.